Micro 2 series Vehicle Reversing Aid is an automatic back up alert
system that warns drivers of potential obstacles while backing up
MINIATURE ACOUSTIC TRANSMITTER/RECEIVER
Micro 2 series Reversing Aid has two (2) miniature
acoustic sensors that transmit a uniquely modified
"narrow beam" signal. This narrow beam signal
is capable of seeing through fog, rain, smog and snow,
any weather, day or night, on any road condition.
When this signal strikes a solid target "directly"
in the path of the host vehicle, it bounces back to
the antenna/receiver and is instantly sent to the
signal MicroProcessor. The acoustic sensors have a
detection range of up to 8 feet. The design of the
sensors coupled with color matching decorative sensor
lens covers ensures ‘out-of-sight’ installation
on your vehicle.
8-BIT SIGNAL MICRO PROCESSOR
8-bit MicroProcessor programmed with ‘Intelligent Control Software’
incorporating ‘fuzzy logic’ processes the target signal
to calculate distance or range, as well as the closing speed between
the host vehicle and the obstacles in the path of the host vehicle.
The processor automatically and continuously computes this information.
If the processor determines that the existing conditions require the
driver to take any precautionary or corrective action, special emergency
sounds are generated.
Micro 2 series speaker can be mounted anywhere inside
the passenger compartment of the vehicle. The unit
comes with a volume adjustment switch on the side.
The system is activated when the driver puts the vehicle
into reverse. The system alerts the driver with a
variable multi-tone audio pulse. The audio pulse intensity
increases and the audio tone changes as the vehicle
backs closer to an obstacle. In addition to the variable
multi-tone audio pulse, the system alerts the driver
with our advance VDI (voice distance indicator) module.
The VDI module verbally tells the driver the vehicle-to-obstacle
distance in feet and inches. It actually talks to
MICRO 2s DETECTION ZONE
Micro 2 series Reversing Aid is designed for easy installation. An
experienced installer will be able to install the system into any
vehicle in about 60 minutes. Some minor drilling could be required
on the plastic part of the bumper and in the taillight well. Most
of the necessary parts and components for the installation are included
in the system package.
1: Install sensors on back of vehicle such as on the bumper or on
the rear panel.
2: Wire system to reverse lamp wire and mount power unit in trunk
or taillight well.
3: Install speaker in passenger compartment by the radio speakers
or on the side panel.
tools an installer will need are a pair of pliers and the proper screw
driver to get access to the reverse lamp power and ground. For a more
professional installation, a drill may be needed.
comprehensive installation guide along with pictures
showing the installation process is included in every
Micro 2s Vehicle Reversing Aid package.
Micro 2s is also available with a Spanish speaking
module in meters.
Any questions? Please E-mail us at: email@example.com