MINIATURE ACOUSTIC TRANSMITTER/RECEIVER
Micro 3 series Reversing Aid’s miniature acoustic sensors transmit
a uniquely modified "narrow beam" signal. This narrow beam
signal is capable of seeing through fog, rain, smog and snow, any
weather, day or night, on any road condition. When this signal strikes
a solid target "directly" in the path of the host vehicle,
it bounces back to the antenna/receiver and is instantly sent to the
signal "Microprocessor". The acoustic sensors have a detection
range of up to 8 feet. The design of the sensors coupled with the
color matching decorative sensor lenses ensures their ‘out-of-sight’
installation on your vehicle.
8-BIT SIGNAL MICRO PROCESSOR
8-bit Micro processor programmed with ‘Intelligent Control Software’
incorporating ‘fuzzy logic’ processes the target signal
to calculate distance or range, as well as the closing speed between
the host vehicle and the obstacles in the path of the host vehicle.
The processor automatically and continuously computes this information.
If the processor determines that the existing conditions require the
driver to take any precautionary or corrective action, special emergency
sounds are generated.
Micro 3 series speaker can be mounted anywhere inside
the passenger compartment of the vehicle. The unit
comes with an adjustable volume control. The system
is activated when the driver puts the vehicle into
reverse. The system alerts the driver with a variable
multi-tone audio pulse. The audio pulse intensity
increases and the audio tone changes as the vehicle
backs closer to an obstacle. In addition to the variable
multi-tone audio pulse, the system alerts the driver
with our advance VDI (Voice Distance Indicator) module.
The VDI module verbally tells the driver the vehicle-to-obstacle
distance in feet and inches. It actually talks to
MICRO 3s DETECTION ZONE
Micro series Reversing Aid is designed for easy installation. An experienced
installer will be able to install the system into any vehicle in about
90 minutes. Some minor drilling could be required on the plastic part
of the bumper and in the taillight well. Most of the necessary parts
and components for the installation are included in the system package.
1: Install sensors on back of vehicle such as on the bumper or on the
2: Wire system to reverse lamp wire and mount power unit in trunk or
3: Install speaker in passenger compartment by the radio speakers or
on the side panel.
tools an installer will need are a pair of pliers and the proper screw
driver to get access to the reverse light power and ground. For a more
professional installation, a drill may be needed.